News / Messen

Thank you for your visit – Productronica 2019

The Productronica 2019 is over and we would like to thank all visitors for the lively visit at our booth and their interest in our products.

This exhibition was very special for us, because we wanted to celebrate our 30th anniversary of Schnaidt GmbH there together with our customers and partners. Looking back, this was a complete success and we were very happy about the great praise and the many congratulations.

For the first time we applied for the Productronica Innovation Award where we submitted our Matrixx system. Even though we are not among the winners, we are still very proud of the innovative strength of our company and the positive responses the system received from many customers. We presented our samples on brand new tables with a Matrixx base plate as a presentation surface. Fast set-up changes and reduced handling times are the advantages that distinguish the Matrixx system – advantages that we were able to demonstrate live at the exhibition with this concept.

The Productronica is regarded as the world’s leading exhibition for electronic manufacturing and we are also becoming increasingly international. We are pleased to announce two official cooperations with the companies EEE S.A. for the Romanian market and Smans NV for the entire Benelux region.

Both companies are well experienced in electronic manufacturing and have an excellent customer network as well as distribute well-known partner companies in their sales areas. Together with our partners in Romania and Benelux we are looking forward to „making your electronics producible”.

Dear colleagues, you should not go unmentioned either: We would like to thank you for your commitment and the great support in the run-up to the exhibition. Only as a team we were able to make the Productronica a great success again.

We are looking forward seeing you soon.

Your Schnaidt Team

The exhibition team of Schnaidt would like to thank you for your visit

New partners - the company Smans
supports us in the whole Benelux region

New partners - the company EEE
supports us on the Romanian market

Visit us at Productronica in Munich

The final countdown has started. From November 12 to November 15 Productronica will open its doors again in Munich. This exhibition is a very special one for us, because the Schnaidt GmbH celebrates its 30th anniversary at Productronica.

Since the foundation of Schnaidt GmbH in 1989, we have been able to support you in countless projects to “make your electronics producible”. Now it’s time to thank you for your loyalty and to celebrate our anniversary properly.

We kindly invite you to visit us in hall A4, booth 566, to toast to the past and discuss about new challenges.

Of course, there will be enough room for the technical part, but we have some special treats in our luggage especially for the anniversary.

We are looking forward to seeing you.

Your Schnaidt Team



  • November 12 to 15, 2019
  • Hall A4 / Booth 566

The Schnaidt exhibition team is looking forward to seeing you.

A successful start to the 2019 exhibition year

The first highlights of the exhibition year 2019 are behind us and we would like to thank you very much for the lively visit to our stand at the SMTconnect 2019 and an extremely successful week in Nuremberg.

In addition to the positive feedback from our customers and interested parties, the shooting day for our new image video was a little highlight for our trade fair team. The video should give you an insight into our way of working and our efficiency, just have a look at it. In a few weeks, the scenes shot at the exhibition will also be included.

We want to thank all visitors for the positive feedback and interest. We look forward to future joint projects and a fruitful cooperation.

Furthermore, we would like to express our admiration and thanks to the shooting team. We ourselves are enthusiastic about our image video and can only praise the smooth shooting day despite the usual exhibition stress. For further information please refer to Think In Pictures .

In the week after the SMT, our sales representative Oliver Hagemes went straight on to the next exhibition in Utrecht in the Netherlands. With our new partner Smans we were represented for the first time at the Electronics & Applications, the leading exhibition in Benelux.

Thanks to the entire Smans team for the first-class support during the E&A and the pleasant cooperation.

Finally, we would like to thank our dear colleagues for their constant support. Without you a successful fair would not be possible.


We look forward to seeing you again soon at your company or in November at the Productronica in Munich.

Your Schnaidt Team

The exhibition team of Schnaidt would like to thank you for your visit

Many thanks to the Smans team for a successful fair in Utrecht

SMTconnect 2019 Nuremberg

SMT Hybrid Packaging became SMTconnect, but nothing changed for us. As every year the Schnaidt team will be exhibiting from May 7 to May 9 in Nuremberg. We kindly invite you to visit us in hall 4, booth 459.

According to our motto “We make electronics producible”, we present numerous high-quality product samples and innovative application examples, with which we have been able to support and optimize various production projects.

As usual our beloved Biergärtle is part of the booth and invites you to stay. Please have some food and drinks and talk to our exhibition team about the challenges of your electronics production and let us convince you of our solution competence.

We are looking forward to seeing you.

Your Schnaidt Team


  • 07. – 09. May 7 to 9, 2019
  • Hall 4 / Booth 459

The Schnaidt exhibition team is looking forward to seeing you.

„Protect your electronics“ with Schnaidt support systems

On the 27th and 28th of November 2018, Mycronics first technology day themed „Protect your electronics“ took place in Eindhoven.

On both days, the program was based on the various aspects of the protective coating process and assisted by notable business partners.

Besides technical lectures, the participants had the chance to intensify their knowledge through practice-oriented workshops within smaller groups.

With our rotatable and variable adjustable coating carrier we have actively accompanied the workshop on the Mycronic protective coating system. Mycronic demonstrated at the machine the differences of the spray and film coatings on two sides of an equipped assembly. Not only did our coating carrier support an easy seating of the assembly for the transport but proofed very effectively how assemblies can be rotated for a both-sided coating without a further set-up process.

We would like to thank Mycronic for the superb organisation of the technology day and the many participants for showing great interest in us and our products and the fruitful discussions with our sales representative Oliver Hagemes.

For further impressions we refer to our picture gallery and we would be pleased meeting you in person on one of our next events.

Mr. Hagemes at Mycronic in Eindhoven

Protect your electronics – technology days at Mycronic

On the 27th and 28th of November the company Mycronic will hold its first technology day themed “Protect your electronics” about protective coating of electronic assemblies in Eindhoven.

Well-known business partners will illustrate the process from different perspectives and impart extensive expertise through lectures and live demonstrations.

We, as the leading supplier of equipment for electronics manufacturing, will present to the audience of the technology day various carrier systems for optimizing the coating process.

Our sales representative Oliver Hagemes is looking forward to welcome you in Eindhoven and fruitful discussions on your process requirements.

Mr. Hagemes will be happy to assist you when it comes to unresolved issues regarding process safety, handling, throughput and intelligent concepts for connecting multiple manufacturing processes.

For further information, please download the invitation for the Mycronic technology day.

SMT 2018 – a successful fair has ended

The SMT 2018 is over and we would like to take the opportunity to thank for the lively visits at our booth, the countless positive conversations, praise and encouragement and finally a successful week in Nuremberg.

We were especially pleased with the interest and positive feedback which we received from our costumers regarding our products. Our wide variety of exhibits for various solder mask concepts have been a highlight. That is why our trade fair motto “Is the old solder wave still alive?” hit the mark and we are confident to say: “Yes, she is still alive!”

We received numerous praise for our depaneling adapters and their various applications. The Matrixx-system has been convincing and our new sample providing automatic panel lowering into the depaneling level before and the perfect supply of the single component for removal after the depaneling process created enthusiasm.

We demonstrated the function of our support tool for the printing process for the first time live at our booth inside a stencil printer and we were able to thereby show its true value.

Our sales employees Oliver Hagemes and Peter Joas have been interviewed by the EPP during the fair. We recommend to watch the full interview to receive more information about our exhibition appearance and our products.

Finally, we would like to take the opportunity to express our gratitude.

We would like to thank the countless interested parties and costumers who visited us at our booth. We are looking forward to approach and realize future projects together.

We also would like to thank Schunk Electronic Solutions GmbH for an amazing time at our shared booth and the long lasting, fruitful partnership.

Furthermore, we would like to thank our numerous large and small business partners for the countless joint ventures, which we already mastered together and which we will attempt together in the future.

Last but not least, we would like to thank our colleagues for their support. You made this fair a real success!

We are looking forward seeing you soon!

Your Schnaidt Team


An eventful Productronica 2017 is behind us

The personal and constructive talks were a huge added value for our company.

In addition to many new contacts, our longstanding existing customers also had interesting discussions and the resulting topics.

Many customers are concerned with the ever-increasing miniaturization of assemblies and the resulting tasks and requirements in paste printing, wave soldering and blanking.

However, electromobility also presents many of our customers with new technical challenges.

The company Schnaidt GmbH is looking forward together with your business partners to tackle and master the tasks arising in the future.

Thanks for your visit! We look forward to implementing the new, exciting projects with you.

Mr. Hagemes strengthens our team

Since 1 October 2017, Oliver Hagemes has been strengthening Schnaidt GmbH in Cologne as a sales representative for the west germany region. Mr. Hagemes brings more than seven years of experience to production equipment for electronic assemblies and is looking forward to the new task in the Schnaidt sales team.

Mr. Oliver Hagemes

We can look back at an eventful SMT 2017 trade fair

Technical discussions of both a personal and constructive nature which we conducted at this event represented considerable added value for our company.

Our latest product, the stencil printing support, attracted visitors like a magnet. This innovation is a successful addition to our portfolio in the process engineering area. The experience of our customers indicates that more than half the problems encountered in the SMD process occur as a result of uneven application of solder paste during stencil printing. In particular, assemblies with large outer dimensions can shift during the stencil printing process, resulting in misalignment during printing. In many cases, the process parameters which can effectively counter this are limited, and increasingly smaller components and pitch distances add to the rejection rate.

In contrast to frequently employed methods involving the checking of product quality on completion of printing using increasingly sophisticated measurement systems, our stencil printing support intervenes directly in the process.

Following a long and exhausting day at the trade fair, our customers also had the chance to refresh themselves again with a cold drink and snack in our very own beer garden.

Your visit to our stand contributed decisively to our success, and we are looking forward to working closely with you on new exciting projects.

The Schnaidt trade fair team - competence in every issue